Customization: | Available |
---|---|
Application Method: | Electrostatic Spray, Fluidized Bed |
Coating Material: | Epoxy, Plastic |
Still deciding? Get samples of US$ 50/Piece
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Galin OptiStar CG07 Manual Gun Control Unit Power Pack
Serial number: 374 059
It's made of durable material, and has long service life. With high-precision model, it's 100% the same as the original one. It can perfectly adapt to OptiFlex series machines. Configured with proportional valve to precisely control gas precision. Stable performance and the powder charge rate can reach 85%-95%. |
The OptiStar CG07 Manual gun control unit is used for electrostatic powder coating with OptiFlex manual equipment (fluidizing-, box- or stirrer device).
The OptiStar CG07 Manual gun control unit allows the configuration of process parameters (air settings, high voltage settings), system parameters, process data, status information and the powder hose correction values. All air volumes can be controlled centrally by the unit.
The handling is simple and self-explanatory.
The coating personnel can save individual settings based off personnel experience.
All settings for efficient powder coating are simple to operate and repeatable. The control unit electronics permit the exact amount of powder delivery and the adjusted values can be read on the digital displays.
The OptiStar CG07 Manual gun control unit can be connected to all usual mains voltages between 100-240 VAC, 50-60 Hz, single phase.
Basic functions Intuitive operation Setting and display of the values on two levels Saving/recalling of process parameters in the form of programs Remote control option on the manual powder gun Additional functions Spray current regulation with high voltage limitation Control of the air volumes Controlling of the stirrer and the vibrator Status indications and error diagnosis |
The OptiStar CG07 Manual gun control unit can be operated with two operating modes. According to the selected application mode, the spray voltage and the spray current are automatically adjusted and limited. Predefined operating mode (Preset mode) The CG07 Gun control unit provides three predefined application modes (flat parts, complicated parts and recoat parts already painted one time). When operating in this mode, the spray voltage and spray current are automatically set and limited. In this operating mode, current (µA) and high voltage (kV) are preset, powder and air volume can be adjusted and saved. The powder and air volume are stored separately for each predefined application mode. User-defined operating mode (Program mode) In this operating mode, 20 individually definable programs (P01-P20) are available. These programs are automatically saved and can be recalled again as the application requires. The values for current, high voltage, powder output, total air, electrode rinsing air and fluidizing air (if available) can be set as needed for a given application. |
Mains input voltage | 100-240 VAC |
Operating frequency | 50-60 Hz |
Input power (without vibrator) | 40 VA |
Nominal output voltage (to the gun) | max. 12 V |
Nominal output current (to the gun) | max. 1 A |
Vibrator connection and power (on the Aux output) | 110/220 VAC max. 100W |
Protection type | IP54 |
Temperature range | 0°C ~ +40°C (+32°F ~ +104°F) |
Max. operating temperature | 85°C (+185°F) |
Compressed air connection (on control unit) | Elbow connection 8 mm |
Compressed air main connection (on filter unit) | G1/4'' - female thread |
Max. input pressure | 10 bar / 145 psi |
Min. input pressure (while unit in operation) | 6 bar / 87 psi |
Max. water vapor content of the compressed air | 1.3 g/m³ |
Max. oil vapor content of the compressed air | 0.1 mg/m³ |
Width | 208 mm |
Depth | 200 mm |
Height | 74 mm |
Weight | approx. 0.5 kg |
OptiStar CG07 Manual gun control unit - complete | 1001 060 |
Protective cover | 1004 426 |
Pneumatic group - complete | 1001 029 |
Throttle motor - completely assembled | 1000 064 |
Main solenoid valve cable - CG07 | 1001 410 |
Spring washer - M3 R | 201 880 |
Hexagon nut - M3 | 202 142 |
Cylinder screw - M3x16 mm | 221 074 |
Screw-in nipple - 1/8", Ø 6 mm, OR | 240 095 |
Fluidizing pad - 1/8"a | 237 264 |
Gasket (steel version only) | 1003 528 |
Cap screw K-SL - M4x16 mm (steel version only) | 216 801 |
O-Ring - Ø 8,73x1,78 mm (steel version only) | 248 428 |
OptiStar CG07 rear wall - complete (aluminium version) OptiStar CG07 rear wall - complete (steel version) |
1000 063 1004 500 |
Rear wall (aluminium version) Rear wall (steel version) |
1000 067 1004 175 |
OptiStar CG07 vibrator connection, assembled | 1001 177 |
Milled nut - M6 | 200 433 |
Hose connection - complete, Ø 6/4 mm (aluminium version) Hose connection - complete, Ø 6/4 mm (steel version) Hose connection - complete, Ø 8/6 mm (aluminium version) Hose connection - complete, Ø 8/6 mm (steel version) |
1001 520 1004 184 1001 519 1004 183 |
Rectus quick release connection - complete (aluminium version) Rectus quick release connection - complete (steel version) |
1001 517 1004 181 |
Gun connection CG07, assembled | 1001 179 |
Mains connection CG07 | 1001 176 |
Cap screw - M3x8 mm | 202 363 |
Cap screw - M3x12 mm Shock protection |
216 747 1001 058 |
Fixing screws for shock protection (2 pieces) - M5x12 mm Corona/Tribo adapter Protection cap for 2.2 Aux connection Connecting cable (power supply) for 2 control units operation |
216 348 1001 869 206 474 1001 867 |
Housing - CG07 control unit (aluminium version) Housing - CG07 control unit (steel version) |
1001 435 1004 200 |
Power pack - 15 VDC | 374 059 |
Power pack connection cable, assembled | 1000 388 |
Connection cable, assembled | 1001 178 |
Standoff - Ø 4/4,8/4,8 mm, PA | 263 508 |
Front plate - complete | 1000 395 |
Front plate with foil keyboard | 1000 394 |
OptiStar mainboard V1.0 - complete, with display | 1000 875 |
Locknut - M3 | 262 498 |
Washer - Ø 3,2/7x0,5 mm | 201 944 |
Standoff - 6x3,4x6,5 mm | 1001 925 |
Standoff - 6x3,4x15,5 mm | 1001 926 |
Compression spring - 0,5x6,3x13,5 mm | 230 251 |
Special screw | 1000 400 |
Weifang Galin Powder Coating Equipment CO.,LTD
Our company located in China Shandong province, specializes in manufacturing the coating equipment.
We are professional in the powder coating system since 2013. Our products include powder coating machine, powder spray gun, booth, sieving machine, hopper, control unit, HV module, PCB board, gun, injector/pump, powder hose, filter and other parts.
We provide not only high quality products, but also the best service.
Our certificate
1. Who are we?
We are based in Shandong, China, start from 2013, sell to Eastern Europe(20.00%), Western Europe(20.00%), Southeast Asia(20.00%), South America(10.00%), Mid East(10.00%), Africa(10.00%),North America(10.00%). There are total about 10 people in our office.
2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3. What can you buy from us?
All kinds of powder coating equipment, such as coating spray gun, powder coating machine, booth, oven and other accessories.
4. Why should you buy from us not from other suppliers?
We are professional in the powder coating system and liquid painting system. We have the most complete coating products of high quality and good price.
5. What services can we provide?
Accepted Delivery Terms: FOB, CFR, CIF, EXW;
Accepted Payment Currency: USD, EUR, JPY, CAD, AUD, HKD, GBP, CNY, CHF;
Accepted Payment Type: T/T, Credit Card, PayPal, Western Union, Cash, Escrow;
Language Spoken: English, Chinese.