| Customization: | Available |
|---|---|
| Application Method: | Electrostatic Spray, Fluidized Bed |
| Coating Material: | Epoxy, Plastic |
|
Still deciding? Get samples of US$ 980/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment methods: |
|
|---|---|
| Support payment in USD |
| Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Galin OptiStar CG08 / CG09 Gun Control Unit
Serial number: 1009 299 / 1007 018
| It's made of durable material, and has long service life. With high-precision model, it's 100% the same as the original one. It can perfectly adapt to OptiFlex series machines. Configured with proportional valve to precisely control gas precision. Stable performance and the powder charge rate can reach 85%-95%. |
| Designation | Function |
| A1-A4 | Display of actual values, desired values and system parameters. Flashes when the possible range is exceeded. |
| A5 | Display of program numbers, error diagnosis codes and status information |
| S1 | Powder output (display in %) |
| S4 | Total air volume (display in Nm³/h) |
| S7 | High voltage (display in kV) |
| S9 | Spraying current (display in µA) |
| S12 | remote Remote operation mode is used as keyboard lock, reduced operation is possible |
| S13 | Display of vibration/fluidization function |
| S15 | Display of predefined operating modes or display of rinsing mode during cleaning |
| Designation | Function |
| T1-T8 | Input keys for desired values and system parameters |
| T9 (Select) | Switch between display levels |
| T10-T11 | Program change |
| T12 | Switching on and off the fluidization (OptiFlex F); Switch on/off for vibration and fluidization (OptiFlex B); Switching on and off the stirrer (OptiFlex S); Switchover to system parameter mode (Press for at least 5 secs.) |
| T13 | Preset mode for flat parts (fixed values) |
| T14 | Preset mode for complex parts with depressions (fixed values) |
| T15 | Preset mode for overcoating parts already coated (fixed values) |
| T16/T17 | Power switch On/Off |
| The OptiStar CG08/09 gun control unit can be operated with two operating modes. According to the selected application mode, the spray voltage and the spray current are automatically adjusted and limited. Predefined operating mode (Preset mode) The gun control unit provides three predefined application modes (flat parts, complicated parts and recoat parts already painted one time). When operating in this mode, the spray voltage and spray current are automatically set and limited. In this operating mode, current (µA) and high voltage (kV) are preset, powder and air volume can be adjusted and saved. The powder and air volume are stored separately for each predefined application mode. User-defined operating mode (Program mode) In this operating mode, 20 individually definable programs (P01-P20) are available. These programs are automatically saved and can be recalled again as the application requires. The values for current, high voltage, powder output, total air, electrode rinsing air and fluidizing air (if available) can be set as needed for a given application. |
| Mains input voltage | 100-240 VAC |
| Operating frequency | 50-60 Hz |
| Input power (without vibrator) | 40 VA |
| Nominal output voltage (to the gun) | max. 12 V |
| Nominal output current (to the gun) | max. 1 A |
| Vibrator connection and power (on the Aux output) | 110/220 VAC max. 100W |
| Protection type | IP54 |
| Temperature range | 0°C ~ +40°C (+32°F ~ +104°F) |
| Max. operating temperature | 85°C (+185°F) |
| Compressed air connection (on control unit) | Elbow connection 8 mm |
| Max. input pressure | 5.5 bar / 80 psi |
| Max. water vapor content of the compressed air | 1.3 g/m³ |
| Max. oil vapor content of the compressed air | 0.1 mg/m³ |
| Width | 173 mm |
| Depth | 250 mm |
| Height | 177 mm |
| Weight | approx. 3.9 kg |
| Part Name | Serial Number |
| OptiStar CG09 Gun control unit - complete | 1007 018 |
| OptiStar CG13 Gun control unit - complete | 1009 971 |
| CG13 Front plate - complete | 1009 860 |
| Front plate with foil keyboard | 1009 859 |
| OptiStar Mainboard V2.0 - complete | 1009 844 |
| PCB Powerboard V2.0 | 1009 865 |
| Front plate gasket | 1007 042 |
| Display | 1007 044 |
| Power pack - 24 VDC | 1009 849 |
| Rear panel gasket | 1007 033 |
| Motor throttle - complete | 1008 012 |
| Throttle motor - completely assembled | 1000 064 |
| Solenoid valve - Ø 8-Ø 8mm, NW 3.4, 24 VDC | 1003 914 |
| Fluidizing pad - 1/8"a | 237 264 |
| Quick release connection - NW5, Ø 6 mm | 200 840 |
| Hose - Ø 6/4 mm | 103 144 |
| Nut with kink protection - M12x1 mm, Ø 8 mm | 201 316 |
| Supplementary air hose - Ø 8/6 mm (black) | 103 756 |
| Quick release coupling for supplementary air hose - NW5-Ø 8 mm | 261 637 |
| Nut with kink protection - M12x1 mm, Ø 8 mm | 201 316 |
| Conveying air hose - Ø 8/6 mm (red) | 103 500 |
| Quick release coupling for conveying air hose - NW5-Ø 8 mm | 261 645 |
| Quick release connection - NW 5 mm | 1004 272 |
| Hose - Ø 8/6 mm | 103 756 |
| Quick release connection - NW 5-Ø 6 mm | 200 840 |
| Hose - Ø 6/4 mm | 100 854 |
| Mains cable - 4.5 m | 1002 563 |
Weifang Galin Powder Coating Equipment CO.,LTD
Our company located in China Shandong province, specializes in manufacturing the coating equipment.
We are professional in the powder coating system since 2013. Our products include powder coating machine, powder spray gun, booth, sieving machine, hopper, control unit, HV module, PCB board, gun, injector/pump, powder hose, filter and other parts.
We provide not only high quality products, but also the best service.
Our certificate
1. Who are we?
We are based in Shandong, China, start from 2013, sell to Eastern Europe(20.00%), Western Europe(20.00%), Southeast Asia(20.00%), South America(10.00%), Mid East(10.00%), Africa(10.00%),North America(10.00%).
2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3. What can you buy from us?
All kinds of powder coating equipment, such as coating spray gun, powder coating machine, booth, oven and other accessories.
4. Why should you buy from us not from other suppliers?
We are professional in the powder coating system and liquid painting system. We have the most complete coating products of high quality and good price.
5. What services can we provide?
Accepted Delivery Terms: FOB, CFR, CIF, EXW;
Accepted Payment Currency: USD, EUR, JPY, CAD, AUD, HKD, GBP, CNY, CHF;
Accepted Payment Type: T/T, Credit Card, PayPal, Western Union, Cash, Escrow;
Language Spoken: English, Chinese.
){kind=link}