| Customization: | Available |
|---|---|
| After-sales Service: | Online Technical Support |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 880/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment methods: |
|
|---|---|
| Support payment in USD |
| Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Galin Kent-B Box Feed Manual Powder Coating Machine
| Galin KENT B Manual Powder Coating Machine - The Galin Kent B box feed manual coating machine has large powder production and high powder charging rate (up to 95%), which can produce a very thick layer (130-140μm) with one spray. And quite save powder and time. - And its current can be adjusted to a very low level (below 10 μA), which can break the faraday cage effect and easily coat deep corners, also achieve good coating effect when re-coating. - Wear-resistant material and long service life. The material prevent high voltage loss and eliminate high voltage preakdown. And it adopts circuit type button to prevent dust accumulation and protect the mainboard. The nozzle lifespan is 4-5 times of regular nozzle. - It has 23 programs, include flat, groove ,recoat, suitable for all kinds of workpieces. |
| Dimensions | Size | 480*680*1110 mm |
| Weight | 39 KG | |
| Pneumatic Data | Min. input pressure | 5 bar |
| Max. input pressure | 8 bar | |
| Max. water vapor content | 1.3 g/m3 | |
| Max. oil vapor content | 0.1 mg/m3 | |
| Max.compressed air consumption | 19 Nm3/h | |
| Electrical Data | Input voltage | 110V / 220V |
| Frequency | 50-60HZ | |
| Connected load (without vibrator) | 40 VA | |
| Nominal output voltage (to the gun) | eff.10 V | |
| Nominal output current (to the gun) | max. 1.2 A | |
| Connection and output for vibrator (on Aux output) | 110/230 VAC max. 100 W | |
| Connection for rinsing function (valve) | 24 VDC max. 3 W | |
| Temperature range | 0 °C - +40 °C (+32 °F - +104 °F) | |
| Max. surface temperature | 120 °C (+248 °F) |
| Cleaning the powder hopper 1. Disconnect the fluidizing air supply 2. Remove the suction hose 3. Remove the cover, blow out with compressed air and clean with a clean dry brush and cloth 4. Empty remaining powder into a container 5. Vacuum up the hopper and in particular the bottom 6. Clean the hopper with a cloth 7. Reassemble the powder hoppe |
| Cleaning the spray gun Daily: 1. Blow off the outside of the gun and wipe, clean etc. 2. Clean the diffuser Weekly: 3. Remove the powder hose from the connection 4. Remove the diffuser from the gun and clean it 5. Remove the spray nozzle from the gun and clean it 6. Blow out the gun from the connection in flow direction with compressed air 7. Clean the integrated gun tube with the provided gun brush 8. Blow through the gun with compressed air again 9. Clean the powder hose 10. Reassemble the gun and connect it |
Weifang Galin Powder Coating Equipment CO.,LTD which located in China Shandong province, specializes in manufacturing the coating equipment. We not only supply the high-quality coating equipment, but also the best service.
We are professional in the powder coating system for many years. Our products include powder coating machine, spray gun, powder booth, sieving machine, hopper, controll unit, HV module, PCB board, gun, injector/pump, powder hose, filter and other parts. You can find all you want for powder coating here.
Q1: What is powder coating?
Powder coating is a dry finishing process that uses finely ground particles of pigment and resin. These particles are electrostatically charged and sprayed onto a surface, where they adhere and are then cured under heat to form a hard, durable finish.
Q2: What are the advantages of powder coating over traditional liquid coatings?
Powder coating offers several advantages, including better durability, higher resistance to chipping, scratching, and fading, less environmental impact as it produces less volatile organic compounds (VOCs), and more efficient application as overspray can be recycled.
Q3: What types of surfaces can be powder coated?
Powder coating can be applied to a wide range of surfaces, including metal (such as steel, aluminum, and zinc), wood, MDF (medium-density fiberboard), and some plastics, provided they are properly pre-treated.
Q4: How long does the powder coating last?
With proper surface preparation and application, powder coating can last for 10 - 20 years or more, depending on the environment and usage conditions.
Q5: How is powder coating applied?
Powder coating is typically applied using an electrostatic spray gun. The charged powder particles are attracted to the grounded surface and form a uniform coating. After spraying, the coated item is cured in an oven at a specific temperature and time to ensure proper adhesion and curing.
Q6: Do I need to prepare the surface before powder coating?
Yes, surface preparation is crucial for a successful powder coating application. This usually involves cleaning, degreasing, and sometimes sandblasting or chemical pretreatment to remove contaminants and improve adhesion.
Q7: What kind of after-sales service do you offer?
We offer comprehensive after-sales service, including quality assurance, technical support, and assistance with any issues or concerns you may have after receiving the products. We stand behind the quality of our powder coating products and are committed to your satisfaction.
Q8: What if I receive a defective or damaged product?
If you receive a defective or damaged product, please contact us immediately. We will assess the situation and either replace the product or provide a refund, depending on the circumstances and our quality control policies.
){kind=link}