| Customization: | Available |
|---|---|
| Application Method: | Electrostatic Spray, Fluidized Bed |
| Coating Material: | Epoxy, Plastic |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
CG06-C Gun Control Unit Canbus PCB (Non OEM)
Serial number: 1001 274
| It's made of durable material, and has long service life. With high-precision model, it's 100% the same as the original one. It can perfectly adapt to Flex series machines. Configured with proportional valve to precisely control gas precision. Stable performance and the powder charge rate can reach 85%-95%. |
The CG06 automatic gun control unit is used for electrostatic powder coating with Flex automatic equipment.
This gun control unit allows the configuration of process parameters (air settings, high voltage settings), system parameters, process data, status information and the powder hose correction values. All air volumes can be controlled centrally by the unit.
The handling is simple and self-explanatory.
The coating personnel can save individual settings based off personnel experience.
All settings for efficient powder coating are simple to operate and repeatable. The control unit electronics permit the exact amount of powder delivery and the adjusted values can be read on the digital displays.
The CG06 automatic gun control unit can be connected to all usual mains voltages between 100-240 VAC, 50-60 Hz, single phase. 
| Basic functions Intuitive operation Setting and display of the values on two levels Saving/recalling of process parameters in the form of programs Remote control option on the manual powder gun Additional functions Spray current regulation with high voltage limitation Control of the air volumes Controlling of the stirrer and the vibrator Status indications and error diagnosis |
| The CG06 gun control unit can be operated with two operating modes. According to the selected application mode, the spray voltage and the spray current are automatically adjusted and limited. Predefined operating mode (Preset mode) The CG06 Gun control unit provides three predefined application modes (flat parts, complicated parts and recoat parts already painted one time). When operating in this mode, the spray voltage and spray current are automatically set and limited. In this operating mode, current (µA) and high voltage (kV) are preset, powder and air volume can be adjusted and saved. The powder and air volume are stored separately for each predefined application mode. User-defined operating mode (Program mode) In this operating mode, 20 individually definable programs (P01-P20) are available. These programs are automatically saved and can be recalled again as the application requires. The values for current, high voltage, powder output, total air, electrode rinsing air and fluidizing air (if available) can be set as needed for a given application. |
Using high-precision mold, it is 100% identical to the originals and can achieve the same effects as the originals.
| Mains input voltage | 100-240 VAC |
| Operating frequency | 50-60 Hz |
| Input power (without vibrator) | 40 VA |
| Nominal output voltage (to the gun) | max. 12 V |
| Nominal output current (to the gun) | max. 1 A |
| Vibrator connection and power (on the Aux output) | 110/220 V AC max. 100W |
| Protection type | IP54 |
| Temperature range | 0°C ~ +40°C (+32°F ~ +104°F) |
| Max. operating temperature | 85°C (+185°F) |
Weifang Galin Powder Coating Equipment CO.,LTD
Our company located in China Shandong province, specializes in manufacturing the coating equipment.
We are professional in the powder coating system since 2013. Our products include powder coating machine, powder spray gun, booth, sieving machine, hopper, control unit, HV module, PCB board, gun, injector/pump, powder hose, filter and other parts.
We provide not only high quality products, but also the best service.
1. Who are we?
We are based in Shandong, China, start from 2013, sell to Eastern Europe(20.00%), Western Europe(20.00%), Southeast Asia(20.00%), South America(10.00%), Mid East(10.00%), Africa(10.00%),North America(10.00%).
2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3. What can you buy from us?
All kinds of powder coating equipment, such as coating spray gun, powder coating machine, booth, oven and other accessories.
4. Why should you buy from us not from other suppliers?
We are professional in the powder coating system and liquid painting system. We have the most complete coating products of high quality and good price.
5. What services can we provide?
Accepted Delivery Terms: FOB, CFR, CIF, EXW;
Accepted Payment Currency: USD, EUR, JPY, CAD, AUD, HKD, GBP, CNY, CHF;
Accepted Payment Type: T/T, Credit Card, PayPal, Western Union, Cash, Escrow;
Language Spoken: English, Chinese.
){kind=link}