| Customization: | Available |
|---|---|
| After-sales Service: | Online Technical Support |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 14/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment methods: |
|
|---|---|
| Support payment in USD |
| Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Wagner PEM C3 Manual Powder Coating Spray Gun Nozzle Insert
Serial Number: 0351940
| Using high-precision molds, 1:1 same as the original one. Perfectly match the original spray gun and achieve the same coating effect. Using wear-resistant materials and have long service life. |
| Input voltage: | max. 22 Vpp |
| Input current: | max. 0.9 A |
| Frequency: | 19 ... 30 kHz |
| Output voltage: | max. 100 kV DC |
| Output current: | max. 160 µA DC |
| Polarity: | negative |
| Design: | as per EN 50050 |
| Protection class: | IP 54 |
| Input air pressure (atomizing air): | max. 3 bar / 43.5 psi |
| Powder output quantity: | max. 450 g/min |
| Residual water in the compressed air: | max. 1.3 g H2O/Nm3 |
| Residual oil in the compressed air: | max. 0.01 mg oil /Nm3 |
| Residual dust in the compressed air: | max. 1 mg dust /Nm3 |
| Particle size in the compressed air: | max. 1 µm |
| Cleaning the spray gun Daily: 1. Blow off the outside of the gun and wipe, clean etc. 2. Clean the diffuser Weekly: 3. Remove the powder hose from the connection 4. Remove the diffuser from the gun and clean it 5. Remove the spray nozzle from the gun and clean it 6. Blow out the gun from the connection in flow direction with compressed air 7. Clean the integrated gun tube with the provided gun brush 8. Blow through the gun with compressed air again 9. Clean the powder hose 10. Reassemble the gun and connect it |
| Article No. | Description |
| 0351020 | Manual Spray Gun PEM-C3 |
| 0351940 | Nozzle insert |
| 0351339 | Wedge |
| 0351620 | Outer nut ET |
| 0351225 | Deflector cone (ø17) |
| 0351226 | Deflector cone (ø25) |
| 0351227 | Deflector cone (ø32) |
| 0351901 | Fan spray nozzle |
| 0351232 | Fan spray nozzle |
| 0351346 | Air nozzle |
| Article No. | Description |
| 0390001 | Manual Spray Gun PEM-C4 |
| 0390311 | Outer nut |
| 0390324 | Fan spray nozzle F1 |
| 0390915 | Electrode holder F ET |
| 0390310 | Protective wedge |
| 0390342 | Adjustment tool (for fan spray nozzles) |
| 0390346 | Spray gun housing rework PEM |
| 0351985 | Handle (right half) PEM-C3 ET |
| 0259387 | Handle (left half) |
| 0390311 | Outer nut ET |
| 0259451 | Trigger |
| 0351652 | Corona manual spray gun cable |
| 0351627 | Protective sleeve plug (complete) |
| 0351618 | Powder tube handle PEM ET |
| 9971316 | O-ring 11.6x1.2 |
| 0390909 | Powder tube C4 ET (PEM) |
| 9971316 | O-ring 11.6x1.2 |
| 0259310 | Pivot bolt |
| 9930804 | Straight pin 3H8x14 |
| 9994284 | Compression spring |
| 9910126 | Cap nut M4 PA6.6 |
| 0351777 | Hose nipple |
| 9982076 | Hose inner ∅3x1 |
| 9985717 | Threaded fitting M5 |
| 9907194 | Fillister head cap screw M6x20 |
| 0259331 | Sealing washer |
| 0351764 | Bend |
| 0259900 | Cascade PEA/PEM |
| 0351320 | Cable reinforcement |
| 0390204 | Nozzle body C4 |
| 0390915 | Electrode holder F ET |
| 0390310 | Protective wedge |
| 0390324 | Fan spray nozzle F1 |
| 9920130 | Washer A4.3 PA6.6 |
| 0390337 | Cover plate PEM-C4 |
| 9907008 | PT-screw |
| 9922020 | Serrated lock washer J2.5 |
| 9913018 | Thread insert M4x7.9 |
| 9998619 | Disk stopper |
Weifang Galin Powder Coating Equipment CO.,LTD which located in China Shandong province, specializes in manufacturing the coating equipment. We not only supply the high-quality coating equipment, but also the best service.
We are professional in the powder coating system for many years. Our products include powder coating machine, spray gun, powder booth, sieving machine, hopper, controll unit, HV module, PCB board, gun, injector/pump, powder hose, filter and other parts. You can find all you want for powder coating here.
1. Who are we?
We are based in Shandong, China, start from 2013, sell to Eastern Europe(20.00%), Western Europe(20.00%), Southeast Asia(20.00%), South America(10.00%), Mid East(10.00%), Africa(10.00%),North America(10.00%).
2. How is the quality of Galin equipment compared to other brands?
A: We are committed to providing high - quality products. Our equipment undergoes strict quality control and testing procedures, and our performance and durability are at the leading level in the industry.
3. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final inspection before shipment.
4. What can you buy from us?
All kinds of powder coating equipment, such as coating spray gun, powder coating machine, booth, oven and other accessories.
5. Why should you buy from us not from other suppliers?
We are professional in the powder coating system and liquid painting system. We have the most complete coating products of high quality and good price. Our products are made of advanced technology and high-quality materials, and the service life is much longer.
6. What are the common spare parts that may need to be replaced?
The common spare parts that may require replacement over time include spray nozzles, filters, pump insert and powder tube. We offer a wide range of spare parts for purchase. Any needs, please feel free to contact us.
7. What services can we provide?
Accepted Delivery Terms: FOB, CFR, CIF, EXW;
Accepted Payment Currency: USD, EUR, JPY, CAD, AUD, HKD, GBP, CNY, CHF;
Accepted Payment Type: T/T, Credit Card, PayPal, Western Union, Cash, Escrow;
Language Spoken: English, Chinese.
){kind=link}